JTR Guided Wave Radar Level Transmitter FineTek

JTR Guided Wave Radar Level Transmitter FineTek Guided Wave Radar uses the Time Domain Reflectometry (TDR) principle, usually applied for both liquid and solid with a different dielectric constant. The sensor emits low power high frequency microwave pulses which are guided through a probe in contact with the process medium, part of the energy is reflected back to the transmitter. The time difference between the transmitted and the reflected pulse is converted into a distance and the total level or interface level is then calculated. The reflection intensity depends on the dielectric constant of the product. The higher the dielectric constant value, the stronger the reflection. Guided wave radar sensor delivers reliable monitoring for both continuous level and interface measurements in medium using a rod or cable type probe.

Features

• 2-wire design with HART communication

• No moving parts and no re-calibration minimizes maintenance

• Not influenced by medium density, conductivity, temperature and pressure

• Handles vapor, steam, foam, buildup and turbulence well

• Suitable for interface level measurement

• Suitable for small tanks, difficult tank geometry, and interfering obstacles

• Local Display for easy on-site installation

• Ignores light continuous coatings Built-in waveform screen (Scope Trace)

• No complicated setup, no computer or programmer required. Download Catalog

Application

• Power plant

• Chemical industry

• Cement

• Water treatment

• Papermaking

• Steelworks

• Crude tank

• Refined oil products storage tank ProcessStandard type for DI water (Pharmaceutical)

Hi temp. type for Boiler