PROFINET/EtherNetIP coupler

More details


The PN/EtherNetIP coupler interlinks a PROFINET network and a EtherNetIP network and permits data transmission between the two networks. The maximum size of the transmitted data is 1024 bytes of input data and 1024 bytes of output data. The PN/EtherNetIP coupler is configured by a GSDML file.


With the PN/EtherNetIP Coupler, a simple and uncomplicated connection of a PROFINET machine to an EtherNet/IP machine is possible. The PN/EtherNetIP Coupler allows data transmission between a PROFINET controller and an EtherNet/IP PLC.


Received input data on one side of the network are made available as output data on the other side of the network to the PLC. The I/O data exchange takes place live and as fast as possible without further handling blocks.


The integration into the PLC engineering tool is made possible by a GSDML file, an extra configuration software is not necessary. The configuration of the I/O data to be exchanged is performed in the Siemens engineering tool. An EDS file matching the configuration can then be downloaded from the website by the PN/EtherNetIP Coupler and used to configure the EtherNet/IP PLC.



  • Up to 1024 Byte input/output data.
  • Redundant power supply.
  • Galvanic isolation of the networks.
  • 300 configurable slots for PROFINET IO data.
  • 3 input and 3 output assemblies.
  • Very compact design for DIN rail mounting.
  • Configuration only with GSDML file, no further software necessary.
  • EDS file downloadable.
  • Diagnostics website.
  • MQTT Publisher on both network sides (PROFINET & Ethernet/IP)
General information
Voltage supply4 V CC (18-28 V CC)
Current drawMáx 210 mA
Ambient temperature0 ° C hasta 60 ° C
Transport and storage temperature20 ° C hasta 80 ° C
Relative air humidity95% non-condensing
Status indicator9 LEDs function status, 8 LEDs Ethernet status
Protection ratingIP 20
CertificationsCE, PROFINET Conformance Class B (en preparación)
Dimensions (DxWxH)32,5 x 58,5 x 76 mm mm
Weight135 gr
Interfaz PROFINET 
ProtocolPROFINET IO Device as defined in IEC 61158-6-1
Transmission rate100 Mbps full Duplex
Connection2 x RJ45
Integrated switchYES
Interfaz EtherNet / IP
ProtocolEtherNet/IP; implicit messaging (Transport Class 1); explicit messaging (Transport Class 3)
Transmission rate10/100 Mbit/s, full-/half duplex
Connection2x RJ45, integrated switch