.svg)
Política de entrega (editar con el módulo de Información de seguridad y confianza para el cliente)
The PROFIBUS-DP bus coupler connects the PROFIBUS with the peripheral modules. It supports the DP-V0 and DP-V1 protocols. In order to start, a bus coupler and at least one peripheral module are required. A total of 64 user-defined modules can be connected in series to the bus coupler. The bus coupler supports hot-plugging for exchanging modules during operation. It detects peripheral modules that are plugged in and assigns each module to the inputs and outputs of the process
General Characteristics:
- PROFIBUS DP slave as per EN 50170/IEC 61158
- Supports all PROFIBUS baud rates
- DP-V0 and DP-V1 support
- A maximum of 64 modules
- Supports hot-plug
- Up to 244 bytes of input data and 244 bytes of output data
- One class 1 master connection with 240 bytes of payload data
- Up to three class 2 master connections with 240 bytes of payload data (as a DP-V1 slave)
- 24 VDC power supply
- I&M data
- Integrated power supply unit for powering peripheral modules (2.5 A)
- Supplies the system’s I/O voltage (24 VDC)
- DIP switch for configuring the PROFIBUS address; can be covered
- LEDs, one of them bi-color
- USB device port for online diagnostics, starting and firmware update with "TB20 ToolBox"
