0-1 Output level switch detector for solids version GP +/-10º ATMI Soliba Ex

0-1 Output level switch detector for solids version GP +/-10º ATMI Soliba Ex

SOLIBA Ex - SF2000 ECO
ATMI Más productos

 

Política de entrega (editar con el módulo de Información de seguridad y confianza para el cliente)

The SOLIBA EX GP is an ATEX certified tilt level switch for bulk solids located in hazardous areas 0, 1, 2 (gas) and 20, 21, 22 (dust) . It has been designed to provide high level measurement in silos or any other type of storage containers. Its operation is very simple: Vertically suspended at the desired high level point, the SOLIBA EX GP will tilt as the grain reaches the unit. To secure your facilities at a minimum cost, the installation of a SOLIBA EX GP  also known as SF2000 ECO high level mechanical tilt level switch is strongly recommended, even if your facilities are already equipped with other types of equipment such as: rotating paddles, vibrating forks, radars, capacitive and ultrasonic sensors, etc.

 

Advantages

  • Economical device, easy to install, easy to use
  • Robust construction, no risk of burial or clogging, even in low-density grains such as soy, sunflower, oats, and barley
  • Enhanced resistance to dust: IP 6X. The operation of the SOLIBA EX GP tilt level switch is not affected even when the device is completely covered with dust !
  • Energy saving: The SOLIBA EX GP tilt level switch only operates when the high level is reached, unlike other types of level measurement devices that operate permanently
  • Ecological tilt level switch (no mercury, no lead)

 

Applications

  • Grains and cereals: oats, sunflower, barley, soybean, rice, wheat, corn, sunflower, etc.
  • Animal food: for pets, for birds and poultry, for cattle, etc.
  • Powders: flou, sugar, cement, etc. 
  • Other bulk solids: granules, stones, minerals, sawdust, pellets, etc. 
  • High level measurement of silos, bins, hoppers, bulk storage zones, etc.
  • High level alarm (sound our light)

 

Technical characteristics

Operation mode     By tilting 
Switching angle      +/- 10º from the vertical point
Cut-out power        10 (4) A (10A resistive – 4A inductive) 
Cable type              HR HY (High Resistance) 
Certification            ATEX II 1 GD EEx ia IIC T6 
Eligible zones         Hazardous areas 0, 1, 2 (gas) and 20, 21, 22 (dust)
Protection                By intrinsically safe relay (also known as pulse isolator) sold separately

Soliba Ex

You might also like